Gast sieben Geschrieben 4. März 2003 Melden Share Geschrieben 4. März 2003 Hallo ! Ich habe probleme mit einer Nokia dbox2 2*I. debug ohne prob nur sie bleibt beim booten bei starting kernel stehen und bootet nicht weiter. hatte auch schon neu gelasht, funzt nicht so richtig. kann mir jemand helfen ? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast ArAfAt Geschrieben 4. März 2003 Melden Share Geschrieben 4. März 2003 Versuch einfach mal ein anderes img! Findeste ja genug im DL bereich! Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast sieben Geschrieben 5. März 2003 Melden Share Geschrieben 5. März 2003 habe ich getan, jetzt schreibt sie nur noch "kein system" egal welche soft drauf ist. wenn ich die originale wieder drauf schiebe, steht sie nur noch in der ladeschleife und bei linux wie gesagt kein system. beim flashen schreibt sie mir keine fehlermeldung aus. ist eine sat-box Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast telte Geschrieben 5. März 2003 Melden Share Geschrieben 5. März 2003 wenn KEIN SYSTEM im display steht, hast du ein falsches image genommen...welche box hast du denn? wenn es ein philips ist, dann musst du ein image nehmen mit 2x (die bezeichnung steht immer hinter einem image) nokia hat meistens 2x sagem hat beide....musst du mal durch die abdeckung deiner box schauen. auf den chips steht intel oder amd drauf.. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast sieben Geschrieben 5. März 2003 Melden Share Geschrieben 5. März 2003 es steht in meiner frage drin !!! ich habe eine Nokia Sat 2*I und ich habe das img PM_base16_26_11_gtx_enx_2xI und das img 338_2xI_modified versucht bei beiden das gleiche. sie bootet bis zum starting kernel und nach ein paar minuten fängt sie wieder von vorn an. auf dem bildschirm sehe ich das bootlogo. als ich auch noch einmal geflasht hatte, schrieb sie mir auch schon mal kein system aus. hängt wohl in einer schleife drin ? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast sky Geschrieben 5. März 2003 Melden Share Geschrieben 5. März 2003 poste mal das Log vom flashen bzw. starten der box. sky Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast sieben Geschrieben 5. März 2003 Melden Share Geschrieben 5. März 2003 debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 01-c6.a8.3c.07.00.00-3d debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.23 debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash will verify ELF image, start= 0x800000, size= 201596 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 ppcboot 0.6.4 (Apr 11 2002 - 16:10:44) Initializing... CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache Board: ### No HW ID - assuming TQM8xxL DRAM: (faked) 32 MB Ethernet: 00-50-9c-44-1e-d2 FLASH: 8 MB LCD driver (KS0713) initialized BOOTP broadcast 1 TFTP from server 192.168.0.1; our IP address is 192.168.0.23 Filename 'C/Programme/tftpboot/logo-lcd'. Load address: 0x130000 Loading: ## done LCD logo at: 0x130000 (0x1F9FFC0 bytes) BOOTP broadcast 1 TFTP from server 192.168.0.1; our IP address is 192.168.0.23 Filename 'C/Programme/tftpboot/logo-fb'. Load address: 0x120000 Loading: ######### done FB logo at: 0x0 (0x1FC0000 bytes) AVIA Frambuffer Input: serial Output: serial 1: Console on ttyS0 2: Console on null 3: Console on framebuffer Select (1-3), other keys to stop autoboot: 0 dbox2-ppcboot> bootp 120000 /C/DBox/Linux-Software/EMU-Images/PM_Base_EMU/PM_bas e16_26_11_gtx_enx_2xI.img BOOTP broadcast 1 TFTP from server 192.168.0.1; our IP address is 192.168.0.23 Filename '/C/DBox/Linux-Software/EMU-Images/PM_Base_EMU/PM_base16_26_11_gtx_enx_ 2xI.img'. Load address: 0x120000 Loading: ####################################################################### ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ###################### done dbox2-ppcboot> protect off 10020000 107fffff ............................................................... Un-Protected 63 sectors dbox2-ppcboot> erase 10020000 107fffff Erase Flash from 0x10020000 to 0x107fffff sector 66 .... done Erased 63 sectors dbox2-ppcboot> cp.l 120000 10020000 1F8000 Copy to Flash... done dbox2-ppcboot> jetzt bei neu booten nach diesem log "kein system" !!! Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Fuemi Geschrieben 5. März 2003 Melden Share Geschrieben 5. März 2003 Das Flashen ist korrekt durchgelaufen. Die Meldung "Kein System" zeugt eigentlich von einem emu für eine Box mit anderer Chipanzahl. Versuch mal für deine Nokia das MicroWood vom 22.12. Sat zu nehmen. Das läuft auf Nokia super stabil. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast sieben Geschrieben 5. März 2003 Melden Share Geschrieben 5. März 2003 wo finde ich das, im emu 2 chip ist nur das MicroWood22.12.2002_Nokia_Kabel2x_EPG_reset.zip geht dies auch für sat ? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Fuemi Geschrieben 5. März 2003 Melden Share Geschrieben 5. März 2003 schau mal bei http://www.ump2002.net/ lag m.E. unter Februar Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast ArAfAt Geschrieben 5. März 2003 Melden Share Geschrieben 5. März 2003 Also ich flashe immer anders als alle hier beschrieben haben, aba ich weiß, dass es mit der variante wir du das gemacht hast und wie die andern das machen, ich auch immer probleme hatte..... https://ssl.kundenserver.de/board.keywelt.o...t=8759&start=20 in dem post steht wie ich das mache, und nimm ruhig ma das MicroWood, das ist wirklich ein sehr gutes img...... und wie in dem anderen posting von mir schon erwähnt, nutze ich ne ganz andere ppcboot...... falls du sie haben möchtest, dann sag bescheid.... Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast sieben Geschrieben 6. März 2003 Melden Share Geschrieben 6. März 2003 hat noch jemand eine idee! hat bis jetzt noch nicht funktioniert... bekomme jetzt nur noch kein system angezeigt, beim flashen schreibt er mir aber keinen fehler aus ???? :cry: Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast Aris Geschrieben 7. März 2003 Melden Share Geschrieben 7. März 2003 Hy Bei der Meldung "copy to flash", wie lange dauerts es da. Hab nähmlich auch mal ne Box gehabt, die nur kein System angezeigt hat. Die war immer in par Sekunden fertig - da war ein Flash hinüber! gruß Aris Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast sky Geschrieben 7. März 2003 Melden Share Geschrieben 7. März 2003 poste mal das Log vom starten (da wo kein System kommt) sky Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast sieben Geschrieben 7. März 2003 Melden Share Geschrieben 7. März 2003 copy to flash bis ende 2:16min danach ausschreibung sollte alles wieder gehen .... Meinst du das vom starten mit yadd? am ende des scriptes steht im display "reset..." debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 01-c6.a8.3c.07.00.00-3d debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.23 debug: Sending TFTP-request for file C/Programme/DBoxBoot/yadd/tftpboot/kernel-y add will verify ELF image, start= 0x800000, size= 590153 verify sig: 260 boot net: boot file has no valid signature boot: elfcopy failed: 16 dbox2:root> Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast sieben Geschrieben 7. März 2003 Melden Share Geschrieben 7. März 2003 copy to flash bis ende 2:16min danach ausschreibung sollte alles wieder gehen .... Meinst du das vom starten mit yadd? am ende des scriptes steht im display "reset..." debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 01-c6.a8.3c.07.00.00-3d debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.23 debug: Sending TFTP-request for file C/Programme/DBoxBoot/yadd/tftpboot/kernel-y add will verify ELF image, start= 0x800000, size= 590153 verify sig: 260 boot net: boot file has no valid signature boot: elfcopy failed: 16 dbox2:root> oder das debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 01-c6.a8.3c.07.00.00-3d debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.23 debug: Sending TFTP-request for file C/Programme/DBoxBoot/yadd/tftpboot/ppcboot will verify ELF image, start= 0x800000, size= 204200 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 ppcboot 0.6.4 (Jun 24 2002 - 20:39:15) Initializing... CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache Board: ### No HW ID - assuming TQM8xxL DRAM: (faked) 32 MB Ethernet: 00-50-9c-44-1e-d2 FLASH: 8 MB LCD driver (KS0713) initialized BOOTP broadcast 1 TFTP from server 192.168.0.1; our IP address is 192.168.0.23 Filename 'C/Programme/DBoxBoot/yadd/tftpboot/logo-lcd'. Load address: 0x130000 Loading: ## done LCD logo at: 0x130000 (0x1FD2814 bytes) BOOTP broadcast 1 TFTP from server 192.168.0.1; our IP address is 192.168.0.23 Filename 'C/Programme/DBoxBoot/yadd/tftpboot/logo-fb'. Load address: 0x120000 Loading: ############## done FB logo at: 0x0 (0x1FC0000 bytes) AVIA Frambuffer Input: serial Output: serial 1: Console on ttyS0 2: Console on null 3: Console on framebuffer Select (1-3), other keys to stop autoboot: 0 ............................................................... Un-Protected 63 sectors BOOTP broadcast 1 TFTP from server 192.168.0.1; our IP address is 192.168.0.23 Filename 'C/Programme/DBoxBoot/yadd/tftpboot/kernel-yadd'. Load address: 0x100000 Loading: ####################################################################### ############################################# done ## Booting Linux kernel at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 590089 Bytes = 576 kB = 0 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.19 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best raft ;-) #1 Mon Sep 23 08:56:15 CEST 2002 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 ip=bootp root=/dev/nfs rw nfsroot=192.168.0.1 :C/Programme/DBoxBoot/yadd/yaddroot/ WARNING: Frequency is not in HZ. Please consider using a newer bootloader! WARNING: OLD intfreq = 67 busfreq = 67 WARNING: NEW intfreq = 67000000 busfreq = 67000000 Decrementer Frequency = 251250000/60 mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 66.56 BogoMIPS Memory: 30944k available (1036k kernel code, 320k data, 68k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 i2c-core.o: i2c core module CPM UART driver version 0.03 ttyS00 at 0x0280 is a SMC ttyS01 at 0x0380 is a SMC pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:44:1e:d2 D-Box 2 flash driver (size->0x800000 mem->0x10000000) Using word write method Creating 3 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00800000 : "flash without bootloader" 0x00000000-0x00800000 : "complete flash" mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) Sending BOOTP requests . OK IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.23 IP-Config: Guessing netmask 255.255.255.0 IP-Config: Complete: device=eth0, addr=192.168.0.23, mask=255.255.255.0, gw=255.255.255.255, host=192.168.0.23, domain=, nis-domain=(none), bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath= NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Looking up port of RPC 100003/2 on 192.168.0.1 Looking up port of RPC 100005/1 on 192.168.0.1 VFS: Mounted root (nfs filesystem). Mounted devfs on /dev Freeing unused kernel memory: 68k init Kernel panic: No init found. Try passing init= option to kernel. <0>Rebooting in 180 seconds.. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast sky Geschrieben 8. März 2003 Melden Share Geschrieben 8. März 2003 Häääää ?????? debug: Transmitting BOOTP request via broadcastdebug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.23 debug: Sending TFTP-request for file C/Programme/DBoxBoot/yadd/tftpboot/ppcboot Was versuchst du den da eigentlich ? Willst du eine Yadd starten oder was ? Wenn ja warum flashst du vorher das Image auf deine Box ? Sorry, aber kann es sein das einiges durcheinder bringst. wenn du dein Image geflasht hast dann schalte mal den Bootmanager ab um zu starten. Wenn du ein Log brauchst von Startvorgang dann schalte alles ab (Bootp/Tftp, NFS, Rarp) und mach nur den Hacken beim Com Terminal. Falls das System dann immer noch nicht startet bitte das Log posten. sky Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast sieben Geschrieben 8. März 2003 Melden Share Geschrieben 8. März 2003 sorry, war mein fehler ! ich habe diesen fehler zum ersten mal! kannst du damit was anfangen ? debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 01-c6.a8.3c.07.00.00-3d debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS boot flash /root/platform/nokia-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/mpc8xx-dbox2/kernel/os in Flash-FS boot flash /root/platform/mpc8xx-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/kernel/os in Flash-FS boot flash /root/platform/kernel/os failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 File /root.new/platform/nokia-dbox2/kernel/os not found: No such file or directo ry boot flash /root.new/platform/nokia-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 File /root.new/platform/mpc8xx-dbox2/kernel/os not found: No such file or direct ory boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 File /root.new/platform/kernel/os not found: No such file or directory boot flash /root.new/platform/kernel/os failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 File /lost+found/root/platform/nokia-dbox2/kernel/os not found: No such file or directory boot flash /lost+found/root/platform/nokia-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 File /lost+found/root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 File /lost+found/root/platform/kernel/os not found: No such file or directory boot flash /lost+found/root/platform/kernel/os failed dbox2:root> Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast sieben Geschrieben 8. März 2003 Melden Share Geschrieben 8. März 2003 dies schrieb er beim 2. mal booten mie pfeil nach oben und standby taste ... dbox2:root> debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 01-c6.a8.3c.07.00.00-3d debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS boot flash /root/platform/nokia-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/mpc8xx-dbox2/kernel/os in Flash-FS boot flash /root/platform/mpc8xx-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/kernel/os in Flash-FS debug: Got Block #0132 will verify ELF image, start= 0x800000, size= 200660 verify sig: 262 Branching to 0x40000 PPCBoot 1.1.6 (TuxBox) (Nov 16 2002 - 10:23:37) CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache Watchdog enabled Board: DBOX2, Nokia I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ........ done. LCD: ready FB: loading - ready In: serial Out: serial Err: serial Options: 1: framebuffer on ttyS0 2: framebuffer on fb0 3: framebuffer on null Select option (1-3), other keys to stop autoboot: 0 ............................................................... Un-Protected 63 sectors ### FS (jffs2) loading 'vmlinuz' to 0x100000 ### FS load compleate: 647481 bytes loaded to 0x100000 ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 647417 Bytes = 632 kB = 0 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... Bad Data CRC => jetzt hängt sie fest und bootet nicht weiter ... Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast sieben Geschrieben 8. März 2003 Melden Share Geschrieben 8. März 2003 mit flash test "pfeil oben gehalten" debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 01-c6.a8.3c.07.00.00-3d debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: &_text 0x10000, &_etext 0x26218, &_data 0x26218, &_edata 0x29d08 debug: &_end 0x34894, &__stack 0x400000 debug: Memory tests (0x400000 -- 0x2000000) debug: NumberTest: debug: passed debug: MarchTest: debug: passed debug: PermTest: debug: passed dbox2:root> boot debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed boot: elfcopy failed: 16 dbox2:root> Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast sieben Geschrieben 11. März 2003 Melden Share Geschrieben 11. März 2003 Danke für eure hilfe, aber leider ohne erfolg !!!! Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast sieben Geschrieben 14. März 2003 Melden Share Geschrieben 14. März 2003 habe es heute hinbekommen ! danke Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge