Gast aldoa1 Geschrieben 6. April 2005 Melden Share Geschrieben 6. April 2005 Hallo, habe eine neue DBOX2 Nokia AVI500 2x. Ein upload per FTP scheitert immer zwischen 6,6 und 7,2 MB. Danach bricht die Verbindung ab. Mit dem neuesten Image Flashing Assistent von Hallenberg gibt es folgendes logfile: [controld] Boxtype detected: (1, Nokia D-BOX2) [nhttpd] Neutrino HTTP-Server starting.. [camd] no card is in slot #2 [camd] no card is in slot #1 àßdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 16/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.178.2, My IP 192.168.178.202 debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot will verify ELF image, start= 0x800000, size= 140592 verify sig: 263 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.1.2 (Tuxbox) (Mar 28 2005 - 13:54:32) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 16 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.178.2; our IP address is 192.168.178.202 Filename 'C/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 192.168.178.2; our IP address is 192.168.178.202 Filename '/tftpboot/logo-lcd'. Load address: 0x100000 Loading: *## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.178.2; our IP address is 192.168.178.202 Filename 'C/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 192.168.178.2; our IP address is 192.168.178.202 Filename '/tftpboot/logo-fb'. Load address: 0x100000 Loading: *#################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 Bank # 1: AMD 29DL323B (32M, bottom boot sect), 32 bit Size: 8192 kB in 71 Sectors Sector Start Addresses: 10000000 10004000 10008000 1000C000 10010000 10014000 10018000 1001C000 10020000 10040000 10060000 10080000 100A0000 100C0000 100E0000 10100000 10120000 10140000 10160000 10180000 101A0000 101C0000 101E0000 10200000 10220000 10240000 10260000 10280000 102A0000 102C0000 102E0000 10300000 10320000 10340000 10360000 10380000 103A0000 103C0000 103E0000 10400000 10420000 10440000 10460000 10480000 104A0000 104C0000 104E0000 10500000 10520000 10540000 10560000 10580000 105A0000 105C0000 105E0000 10600000 10620000 10640000 10660000 10680000 106A0000 106C0000 106E0000 10700000 10720000 10740000 10760000 10780000 107A0000 107C0000 107E0000 Bank # 2: missing or unknown FLASH type Using SCC ETHERNET device TFTP from server 192.168.178.2; our IP address is 192.168.178.202 Filename 'kernel-yadd'. Load address: 0x100000 Loading: *################################################################# ################################################################# #################### done Bytes transferred = 763552 (ba6a0 hex) ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 763488 Bytes = 745.6 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK <0>Rebooting in 180 seconds.. ------ Zusatzinformationen ------ Gewählter Netzwerkadapter: SiS 900-basierte PCI-Fast Ethernet-Adapter - Paketplaner-Miniport (1) IP-Adresse des Netzwerkadapters: 192.168.178.2 IP-Adresse die die dbox bekommt: 192.168.178.202 Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600) DBOX-IFA Version: 1.7.0.1 Dateiname des Images: Keywelt_2005_2xI_Maerz_Release.img Imagetyp: Zwei Flashs ------ Powered by http://www.dboxservice-hallenberg.de ------ Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin SnowHead Geschrieben 6. April 2005 Admin Melden Share Geschrieben 6. April 2005 @aldoa1 ...Loading: *## ... Dein Netzwerk ist nicht in Ordnung. Schalte mal alle Virenscanner, Firewalls, Tools zum anonymen Surfen und Netzwerkanalysetools aus. Unter den Netzwerkeigen- schaften mal den QoS-Paketplaner deinstallieren. Dann auch mal die Übertragungsstrecke checken. Klick Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast gurgel Geschrieben 6. April 2005 Melden Share Geschrieben 6. April 2005 bei der Box stimmt was mit dem RAM nicht, zumal sie auch nur 16MB hat... Hilft nur reparieren lassen... Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
derberg_de Geschrieben 6. April 2005 Melden Share Geschrieben 6. April 2005 du brauchst ne andere ppcboot für die 16MB ram box. schau mal hier. http://www.keywelt-board.com/index.php?showtopic=34744&h Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast gurgel Geschrieben 12. April 2005 Melden Share Geschrieben 12. April 2005 das stimmt nicht, der neue Flashassistent kann auch mit nur 16MB... Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge