Jump to content

Zwitschern Nokia 500


fw1703

Empfohlene Beiträge

Hey,

 

jemand hier im Haus hat meine Nokia gehimmelt. Zeigt EPG an, meine umgerechnet 11,5db kommen auch an, der EPG wird angezeigt.

 

Bootlog:

 

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a dsID 01-7a.5f.1f.07.00.00-48

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0036

 

will verify ELF image, start= 0x800000, size= 163276

verify sig: 262

Branching to 0x40000

 

 

U-Boot 1.2.0 (Tuxbox) (Oct 30 2008 - 00:52:36)

 

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Board: DBOX2, Nokia, BMon V1.0

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: ... done.

env: found "console" with value ttyS0

env: found "lcd_inverse" with value 0

env: found "lcd_contrast" with value 15

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 670269 bytes loaded to 0x100000

............................................................... done

Un-Protected 63 sectors

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 670205 Bytes = 654.5 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.36.6-dbox2 (image@Server) (gcc version 3.4.6) #51 Do Okt 30 00

:53:14 CET 2008

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0,9600 dbox_duplex= root=/dev/mtdblock2 rootfst

ype=squashfs

Decrementer Frequency = 252000000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

half-duplex mode enabled

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:18:4a:52

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x005e0000 : "root (squashfs+lzma)"

0x005e0000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.7.2 (2008-10-30 00:59:12 CET)

 

 

##### Image-Version: Keywelt_Okt2008_V1 #####

 

Thu Oct 30 01:19:00 UTC 2008

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

tuxbox: no IDE-Interface detected

Detected STB:

Vendor: Nokia

Model: D-BOX2

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.36.6-dbox2/misc/dbox2_fp_input.o was compiled for kerne

l version 2.4.36-dbox2

while this kernel is version 2.4.36.6-dbox2

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.36.6-dbox2/misc/avia_av.o was compiled for kernel versi

on 2.4.36-dbox2

while this kernel is version 2.4.36.6-dbox2

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_core: masking unhandled irq reg 0 bit 6

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.36.6-dbox2/misc/ves1820.v12.o was compiled for kernel v

ersion 2.4.36-dbox2

while this kernel is version 2.4.36.6-dbox2

DVB: registering frontend 0:0 (VES1893)...

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

 

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.273 2008/10/

12 10:51:53 seife Exp $

[sectionsd] Caching max 1500 events

[sectionsd] Caching 4 days

[sectionsd] Caching 12 hours Extended Text

[sectionsd] Events are old 120min after their end time

/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

/var/tuxbox/config/mybouquets.xml: No such file or directory

/var/plugins/operations camd_init

/var/plugins/operations cardserver_start

$Id: zapit.cpp,v 1.410k 2008/04/08 10:00:00 Kroki & Worschter & SnowHead Exp $

[zapit] MAX_SOCKETS=3

[zapit] PMT update enabled

[frontend] uncommitted_switch_mode 0

avia_gt_core: masking unhandled irq reg 0 bit 7

/var/plugins/operations camd_start

insmod: warning: kernel-module version mismatch

/var/modules/multicam.o was compiled for kernel version 2.4.36-dbox2

while this kernel is version 2.4.36.6-dbox2

DBox2 Multicam Driver v1.01 skars & doz21 :P

starte camd2

[camd2] EMM : active

[camd2] Socket=/tmp/camd.sock02

[camd] ca system id: 1702

[getservices] /var/tuxbox/config/zapit/myservices.xml found.

[getservices] dup transponder id 3 onid 85

[getservices] dup transponder id 11 onid 85

[getservices] dup transponder id 2 onid 85

[getservices] dup transponder id 4 onid 85

[getservices] dup transponder id 1 onid 85

/tmp/currentservices.xml: No such file or directory

$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $

 

[controld] Boxtype detected: (1, Nokia D-BOX2)

[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1

[controld] format: 4:3(LB)

[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

[sectionsd] getUTC: read: Connection timed out

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[yhttpd] Webserver starting...

/var/plugins/operations sect_renice

/var/plugins/operations epg_reinit

neutrino: /lib/libpng12.so.0: no version information available (required by neut

rino)

starting /bin/neutrino

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] Software update enabled

[neutrino] enable flash

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

/dev/input/event1: No such file or directory

[neutrino] menue setup

[neutrino] received 32 sats

[neutrino] registering as event client

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[neutrino] initialized everything

SPTS, queue 0 extended.

[timeThread] - 23.12.2008 20:04:13, tim: Tue Dec 23 20:04:13 2008

avia_gt_core: masking unhandled irq reg 1 bit 15

02:20:14.706 dmxSDT: going to sleep...

[timeThread] Time set via DVB, going to sleep for 1800 seconds.

20:04:13.221 dmxCN: going to sleep...

20:04:13.223 eit_set_update_filter, servicekey = 0x44d00016dca, current version

255

 

kann daraus jemand was lesen?

 

Danke!

Link zu diesem Kommentar
Auf anderen Seiten teilen

Defekt wird wohl dann schon was sein. Aber was, vermeldet das Logfile nicht.

 

avia hin?

Die typische Microcode-Fehlerwarnung ist nicht im Log. Ich wüßte da auch erst mal keinen guten Rat, außer daß Du die Box mal Ralf-Jürgen Bader zur Überprüfung zukommen läßt. Per Ferndiagnose ist so ein Fehler wohl eher nicht rauszufinden.

Link zu diesem Kommentar
Auf anderen Seiten teilen

Archiviert

Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.

  • Wer ist Online   0 Benutzer

    • Keine registrierten Benutzer online.
×
×
  • Neu erstellen...