nach "BOOTING" schaltet sich meine DBOX aus. HILFE

2. Mai 2003

Ich habe folgendes Problem: Meine BOX bootet ganz normal aber dann kurz bevor der Vorgang zu ende sein müsste schaltet sie sich aus. Neu Flashen funktioniert aber dann tritt das gleich Problem auf.

Es handelt sich um eine Nokia 2*i für Kabel.

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0 mID 01

debug: feID 7a gtxID 0b

debug: fpID 5a dsID 01-2d.45.1b.07.00.00-2c

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202996

verify sig: 262

Branching to 0x40000

PPCBoot 1.1.6 (TuxBox) (Aug 5 2002 - 09:06:03)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Watchdog enabled

Board: DBOX2, Nokia

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: . done.

LCD: ready

FB: loading - ready

In: serial

Out: serial

Err: serial

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select (1-3), other keys to stop autoboot: 0

...............................................................

Un-Protected 63 sectors

### FS (cramfs) loading 'vmlinuz' to 0x100000

### FS load compleate: 582941 bytes loaded to 0x100000

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 582877 Bytes = 569 kB = 0 MB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.19 (tuxbox@linux) (gcc version 3.1) #1 Die Aug 6 13:53:36 CEST

2002

Wer Kernel nachmacht, oder faelscht, oder nachgemachte, oder falsche in Umlauf b

ringt, wird mit alexW-Images nicht unter Basisimage 1.6 bestraft. Skars :-)

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 console=ttyS0

Decrementer Frequency = 252000000/60

mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)

Console: colour dummy device 80x25

Calibrating delay loop... 66.76 BogoMIPS

Memory: 30928k available (1016k kernel code, 360k data, 64k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

AB.

i2c-core.o: i2c core module

i2c-proc.o version 2.6.1 (20010825)

CPM UART driver version 0.03

ttyS00 at 0x0280 is a SMC

ttyS01 at 0x0380 is a SMC

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:1f:63:eb

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

Using word write method

Creating 7 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "flfs (ppcboot)"

0x00040000-0x00600000 : "root (cramfs)"

0x00600000-0x00700000 : "emu (jffs2)"

0x00700000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "flash without bootloader"

0x00000000-0x00800000 : "complete flash"

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (cramfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 64k init

init started: BusyBox v0.60.2 (2002.08.17-23:19+0000) multi-call [i2c-8xx]: mpc

8xx i2c init

i2c-core.o: adapter registered as adapter 0.

[i2c-8xx]: adapter: 0

i2c-core.o: driver FOR_PROBE_ONLY registered.

i2c-core.o: driver unregistered: FOR_PROBE_ONLY

event: init ...

i2c-core.o: driver i2c saa7126 driver registered.

i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).

i2c-core.o: driver i2c audio/video switch driver registered.

i2c-core.o: client [CXA2092] registered to adapter [](pos. 1).

i2c-core.o: driver DBox2 Frontprocessor driver registered.

i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2

).

AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $

avia_core.c: load_dram_image: Microcode verify: 175 errors.

der moment ist gekommen...

i2c-core.o: driver DBox2-CAM registered.

CAM: attaching CAM at 0x6e

i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).

CAM: attached to adapter

/lib/modules/2.4.19/misc/avia.o: init_module: Input/output error

Hint: insmod errors can be caused by incorrect module parameters, including inva

lid IO or IRQ parameters.

You may find more information in syslog or the output from dmesg

mice: PS/2 mouse device common for all mice

BusyBox v0.60.2 (2002.08.17-23:19+0000) multi-call binary

Usage: busybox [function] [arguments]...

or: [function] [arguments]...

BusyBox is a multi-call binary that combines many common Unix

utilities into a single executable. Most people will create a

link to busybox for each function they wish to use, and BusyBox

will act like whatever it was invoked as.

Currently defined functions:

[, ash, busybox, cat, chgrp, chmod, chown, clear, cp, date, dd,

df, dmesg, du, echo, env, false, find, grep, gunzip, gzip, halt,

hostname, ifconfig, init, kill, killall, klogd, ln, ls, mkdir,

more, mount, mv, nslookup, ping, ps, pwd, reboot, reset, rm, rmdir,

route, sed, sh, sleep, sync, syslogd, tail, tar, test, touch,

true, umount, uname, uptime, vi, wget, which, xargs, yes, zcat

/lib/modules/2.4.19/misc/avia_gt.o: unresolved symbol avia_set_pcr

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface on 1

/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_wait

/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_wr

/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_command

/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_rd

/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_flush_pcr

/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_gt_pcm_set_mpeg_attenuati

on

/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_gt_pcm_set_pcm_attenuatio

n

Init VES1820

initializing core...

adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

Intializing font cache...

FTC_Face_Requester (Micron/Bold)

/lib/modules/2.4.19/misc/ves1820.o: unresolved symbol register_frontend

/lib/modules/2.4.19/misc/ves1820.o: unresolved symbol unregister_frontend

/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_queue

_irq

/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol unregister_demux

/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_pcr_p

id

/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_queue

_write_pointer

/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_alloc_irq

/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol register_demux

/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_pid_t

able

/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_force_dis

continuity

/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_pid_c

ontrol_table

/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol gtx_set_queue_pointer

/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_get_info

/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_get_queue

_write_pointer

/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_free_irq

/lib/modules/2.4.19/misc/avia_gt_vbi.o: unresolved symbol avia_gt_get_info

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_show

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_get_clut

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_input_si

ze

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_pos

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_hide

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_get_info

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_size

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_input_mo

de

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_clut

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_blevel

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_get_info

CXA2092 found

Network LCD-Driver $Id: lcdd.cpp,v 1.51 2002/07/10 16:29:08 LazyT Exp $

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[lcdd] load config

initializing core...

adding font /share/fonts/micron.ttf...OK (Micron/Regular)

Intializing font cache...

FTC_Face_Requester (Micron/Regular)

$Id: sectionsd.cpp,v 1.126 2002/05/15 10:00:55 dirch Exp $

caching 504 hours

events are old 60min after their end time

[sectionsd] DMX: /dev/ost/demux0: No such file or directory

[camd] /dev/dvb/card0/ca0: No such file or directory

[sectionsd] DMX: /dev/ost/demux0: No such file or directory

[sectionsd] DMX: DMX_STOP: Bad file descriptor

$Id: zapit.cpp,v 1.193M 2002/12/20 20:12:51 gbox Version Exp $

[zapit] Using /var/keys/camd for Emu mode.

[sectionsd] DMX: /dev/ost/demux0: No such file or directory

[getservices.cpp] going to parse satellite Astra 19.2E

[sectionsd] DMX: /dev/ost/demux0: No such file or directory

[zapit] reading Bouquets ...............................

[zapit] Found 32 bouquets.

[sectionsd] DMX: /dev/ost/demux0: No such file or directory

[zapit] channels have been loaded succesfully

/dev/ost/frontend0: No such file or directory

[zapit] unable to open frontend devices. bye.

Segmentation fault

Controld $Id: controld.cpp,v 1.58 2002/05/08 16:21:43 McClean Exp $

[controld] Boxtype detected: (01, 1, 1, Nokia)

set event: 00000009

[sectionsd] DMX: /dev/ost/demux0: No such file or directory

[nhttpd] Neutrino HTTP-Server starting..

[sectionsd] DMX: /dev/ost/demux0: No such file or directory

zapitclient: connect: No such file or directory

[sectionsd] DMX: /dev/ost/demux0: No such file or directory

[neutrino] NeutrinoNG : v 1.309.151 2002/12/21 11:45:22 gbox Version

[neutrino] New Options : [-key] (Keyeditor) [-gbox] (gboxMenu)

[neutrino] [-noshutdown] (behaviour for router)

[neutrino] [-softcam] (Softcam Settings)

[neutrino] [-cug] (Keyeditor+gboxMenu+Softcam)

####################################################################

## ##

## gbox X-MAS Edition 2002 ##

## ##

[sectionsd] DMX: /dev/ost/demux0: No such file or directory

## !!! Not for SALE and any commerical use !!! ##

## ##

## Thanks to all developers who make this happen. ##

## ##

## Be fair - No payTV without subscription. ##

## ##

## -------------------------------------------------------------- ##

## ##

## Magic, but not a dream. Season's Greetings from the gbox Team. ##

[sectionsd] DMX: /dev/ost/demux0: No such file or directory

## ##

####################################################################

[neutrino] frameBuffer Instance created

[neutrino] vcrControl Instance created

/dev/fb/0: No such file or directory

framebuffer not available.

FBIOPUT_VSCREENINFO: Bad file descriptor

[neutrino] Error while setting framebuffer mode

The system is going down NOW !!

Sending SIGTERM to all processes[nhttpd] stop requested......Sending SIGKILL to

all processes.

CXA2092 found

The system is halted. Press CTRL-ALT-DEL or turn off power

System halt

Fuemi · 2. Mai 2003

Das Flashen kann bei dir wohl kaum funktionieren. Da sind die Fehlermeldungen: boot net failed und Error:serial

Das heißt im Klartext, da sind Probleme in deinem Netzwerk / und ggf. im Nullmodemkabel.

Überprüf noch einmal die Einstellungen.

2. Mai 2003

Danke erstmal für die schnelle Antwort. Ich habe ja schon geflasht. Das LOG ist vom hochfahren. Was bedeuten die Fehlermeldungen zum Schluss?

"neutrino] frameBuffer Instance created

[neutrino] vcrControl Instance created

/dev/fb/0: No such file or directory

framebuffer not available.

FBIOPUT_VSCREENINFO: Bad file descriptor

[neutrino] Error while setting framebuffer mode

The system is going down NOW !! "

Danach schaltet sich die BOX ja aus wie man lesen kann.

2. Mai 2003

Hatte das Problem auch. Habe dann einfach nochmal neu geflasht und schon lief es. Hast du deine Netzwerkkarte auch auf 10 Halbduplex stehen?

2. Mai 2003

Flash mal ein anderes Image und schau ob deine Box dann den selben Fehler macht.

sky

2. Mai 2003

Ich habe wirklich schon sehr viele IMAGES getestet aber keins funktioniert. Ist meine BOX jetzt kaputt? Hier nochmal ein BOOTLOG vom hochfahren der BOX:

Bei diesem IMAGE schaltet sie sich wenigstens nicht mehr aus.

Sie hängt aber bei BOOTING!!! Es muss doch einer weiter wissen oder?

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0 mID 01

debug: feID 7a gtxID 0b

debug: fpID 5a dsID 01-2d.45.1b.07.00.00-2c

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 203252

verify sig: 262

Branching to 0x40000

PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 20:57:43)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Watchdog enabled

Board: DBOX2, Nokia

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: . done.

LCD: ready

FB: loading - ready

In: serial

Out: serial

Err: serial

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select (1-3), other keys to stop autoboot: 0

...............................................................

Un-Protected 63 sectors

### FS (cramfs) loading 'vmlinuz' to 0x100000

### FS load compleate: 582785 bytes loaded to 0x100000

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 582721 Bytes = 569 kB = 0 MB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.19 (tuxbox@linux) (gcc version 3.2) #1 Die Sep 3 21:32:44 CEST

2002

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 console=ttyS0

Decrementer Frequency = 252000000/60

mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)

Console: colour dummy device 80x25

Calibrating delay loop... 66.76 BogoMIPS

Memory: 30928k available (1016k kernel code, 360k data, 64k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

AB.

i2c-core.o: i2c core module

i2c-proc.o version 2.6.1 (20010825)

CPM UART driver version 0.03

ttyS00 at 0x0280 is a SMC

ttyS01 at 0x0380 is a SMC

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:1f:63:eb

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

Using word write method

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "flfs (ppcboot)"

0x00040000-0x00700000 : "root (cramfs)"

0x00700000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "flash without bootloader"

0x00000000-0x00800000 : "complete flash"

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (cramfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 64k init

init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-ca[i2c-8xx]: mpc

8xx i2c init

i2c-core.o: adapter registered as adapter 0.

[i2c-8xx]: adapter: 0

i2c-core.o: driver FOR_PROBE_ONLY registered.

i2c-core.o: driver unregistered: FOR_PROBE_ONLY

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface on 1

event: init ...

i2c-core.o: driver i2c audio/video switch driver registered.

i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).

i2c-core.o: driver i2c saa7126 driver registered.

i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).

i2c-core.o: driver DBox2 Frontprocessor driver registered.

i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2

).

AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $

avia_core.c: load_dram_image: Microcode verify: 176 errors.

/lib/modules/2.4.19/misc/avia.o: init_module: Input/output error

Hint: insmod errors can be caused by incorrect module parameters, including inva

lid IO or IRQ parameters.

You may find more information in syslog or the output from dmesg

der moment ist gekommen...

i2c-core.o: driver DBox2-CAM registered.

CAM: attaching CAM at 0x6e

i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).

CAM: attached to adapter

Lade alternativen avia_gt.o

/var/modules/avia_gt.o: unresolved symbol avia_set_pcr

/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_wait

/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_wr

/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_command

/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_rd

/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_flush_pcr

/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_gt_pcm_set_mpeg_attenuati

on

/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_gt_pcm_set_pcm_attenuatio

n

Init VES1820

/lib/modules/2.4.19/misc/ves1820.o: unresolved symbol register_frontend

/lib/modules/2.4.19/misc/ves1820.o: unresolved symbol unregister_frontend

Lade alternativen avia_gt_napi.o

/var/modules/avia_gt_napi.o: unresolved symbol unregister_demux

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_dmx_queue_irq_enable

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_pcr_pid

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_queue_write_point

er

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_dmx_alloc_queue_teletext

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_dmx_get_queue_irq

/var/modules/avia_gt_napi.o: unresolved symbol register_demux

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_pid_table

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_dmx_force_discontinuity

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_pid_control_table

/var/modules/avia_gt_napi.o: unresolved symbol gtx_set_queue_pointer

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_get_info

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_dmx_alloc_queue_video

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_dmx_free_queue

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_dmx_queue_irq_disable

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_dmx_alloc_queue_audio

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_dmx_get_queue_write_point

er

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_dmx_alloc_queue_user

/var/modules/avia_gt_napi.o: unresolved symbol avia_gt_free_irq

/lib/modules/2.4.19/misc/avia_gt_vbi.o: unresolved symbol avia_gt_get_info

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_show

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_get_clut

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_input_si

ze

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_pos

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_hide

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_get_info

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_size

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_input_mo

de

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_clut

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_blevel

/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_get_info

Lade alternativen avia_gt_oss.o

/var/modules/avia_gt_oss.o: unresolved symbol avia_gt_pcm_play_buffer

/var/modules/avia_gt_oss.o: unresolved symbol avia_gt_pcm_stop

/var/modules/avia_gt_oss.o: unresolved symbol avia_gt_pcm_set_signed

/var/modules/avia_gt_oss.o: unresolved symbol avia_gt_pcm_set_endian

/var/modules/avia_gt_oss.o: unresolved symbol avia_gt_pcm_set_rate

/var/modules/avia_gt_oss.o: unresolved symbol avia_gt_pcm_set_width

/var/modules/avia_gt_oss.o: unresolved symbol avia_gt_pcm_poll

/var/modules/avia_gt_oss.o: unresolved symbol avia_gt_pcm_set_channels

/var/modules/avia_gt_oss.o: unresolved symbol avia_gt_pcm_set_pcm_attenuation

/var/modules/avia_gt_oss.o: unresolved symbol avia_gt_pcm_get_block_size

/lib/modules/2.4.19/misc/avia_gt_proc.o: unresolved symbol avia_gt_get_info

CXA2092 found

cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

[TIMERD]IDS: 0

$Id: sectionsd.cpp,v 1.128 2002/08/27 19:00:45 obi Exp $

caching 504 hours

events are old 60min after their end time

[camd] /dev/dvb/card0/ca0: No such file or directory

[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory

[sectionsd] DMX: DMX_STOP: Bad file descriptor

$Id: zapit.cpp,v 1.216 2002/09/04 13:57:39 neBox Exp $

[getservices.cpp] going to parse cable Telekom/Ish

[zapit] LoadServices: success

[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory

[zapit] reading Bouquets ..........

[zapit] Found 10 bouquets.

[zapit:bouquets.cpp:renumServices] In Bouquets: TV Channels #: 106, Radio Channe

ls #: 47.

[zapit:bouquets.cpp:makeRemainingChannelsBouquet] TV Channels #: 106, Radio Chan

nels #: 47.

[zapit] channels have been loaded succesfully

/dev/dvb/card0/frontend0: No such file or directory

[zapit] unable to open frontend devices. bye.

Segmentation fault

97: Killed

[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory

Network LCD-Driver $Id: lcdd.cpp,v 1.54 2002/08/31 22:30:27 obi Exp $

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[lcdd] load config

initializing core...

adding font /share/fonts/micron.ttf...OK (Micron/Regular)

Intializing font cache...

FTC_Face_Requester (Micron/Regular)

Controld $Id: controld.cpp,v 1.61 2002/08/27 19:00:45 obi Exp $

[controld] Boxtype detected: (01, 1, 1, Nokia)

set event: 00000009

[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory

[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.318 2002/09/07 16:33:46 dirch Exp $

[neutrino] frameBuffer Instance created

[neutrino] vcrControl Instance created

/dev/fb/0: No such file or directory

framebuffer not available.

FBIOPUT_VSCREENINFO: Bad file descriptor

[neutrino] Error while setting framebuffer mode

Please press Enter to activate this console. [sectionsd] DMX: /dev/dvb/card0/dem

ux0: No such file or directory

[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory

4. Mai 2003

HIER MUSS DOCH JEMAND BESCHEID WISSEN ODER DIE GLEICHEN GEHABT HABEN!!!!!!!!!!!!!!!!!

5. Mai 2003

Was schreist du denn hier rum ???

Kenn das Problem:

[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory

aber bei mir lag es am Image. Das lief halt nicht auf meiner Box mit einem anderen hats dann geklappt.

Wie flashst du denn ?

Poste mal das Log vom Flashvorgang vieleicht kann man da was sehen.

sky

5. Mai 2003

Ich bereue es langsam, dass ich überhaupt Linux draufgemacht habe.

Das ist mein Flash-Log:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0 mID 01

debug: feID 7a gtxID 0b

debug: fpID 5a dsID 01-2d.45.1b.07.00.00-2c

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Got BOOTP reply from Server IP 192.168.160.10, My IP 192.168.160.32

debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash

will verify ELF image, start= 0x800000, size= 201596

verify sig: 262

boot net: boot file has no valid signature

Branching to 0x40000

ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...

CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Board: ### No HW ID - assuming TQM8xxL

DRAM: (faked) 32 MB

Ethernet: 00-50-9c-1f-63-eb

FLASH: 8 MB

LCD driver (KS0713) initialized

BOOTP broadcast 1

TFTP from server 192.168.160.10; our IP address is 192.168.160.32

Filename 'C/Programme/tftpboot/logo-lcd'.

Load address: 0x130000

Loading: ##

done

LCD logo at: 0x130000 (0x1F9FFC0 bytes)

BOOTP broadcast 1

TFTP from server 192.168.160.10; our IP address is 192.168.160.32

Filename 'C/Programme/tftpboot/logo-fb'.

Load address: 0x120000

Loading: #########

done

FB logo at: 0x0 (0x1FC0000 bytes)

AVIA Frambuffer

Input: serial

Output: serial

1: Console on ttyS0

2: Console on null

3: Console on framebuffer

Select (1-3), other keys to stop autoboot: 0

dbox2-ppcboot> bootp 100000 /C/Downloads/DigiTV/Dbox-Linux/NeuerOrdner/Nokia_2xI

NTEL_2_01_KABELkeinsystem.img

BOOTP broadcast 1

TFTP from server 192.168.160.10; our IP address is 192.168.160.32

Filename '/C/Downloads/DigiTV/Dbox-Linux/NeuerOrdner/Nokia_2xINTEL_2_01_KABELkei

nsystem.img'.

Load address: 0x100000

Loading: #######################################################################

################################################################################

################################################

done

dbox2-ppcboot> protect off 10020000 107fffff

...............................................................

Un-Protected 63 sectors

dbox2-ppcboot> erase 10020000 107fffff

Erase Flash from 0x10020000 to 0x107fffff

sector 66 .... done

Erased 63 sectors

dbox2-ppcboot> cp.l 120000 10020000 1F8000

Copy to Flash... done

dbox2-ppcboot>[/size]

5. Mai 2003

Hi!

Ich kann Deine Verzweiflung nachvollziehen............ Soviel zum Mitleid!

Ist das Log alles? Da fehlt doch was!

Biste sicher, dass dieses Image auf Deine Box passt? Stimmt der Verzeichnispfad zu ppcboot und Image? (Ich weis, is ne blöde Frage, aber ...). Gib mal im im ComTerminal am Prompt einfach RESET ein. Vielleicht hat der schreibeprobleme....

Werde das mal testen....

Viel Erfolg bis dahin....

Tachyon

6. Mai 2003

@jonnywalker

Dein FlashLog sieht eigentlich gut aus, schein alles korrekt übertragen zu werden. Kann sein das deine Box ein Problem mit dem AVIA Chip hat. Haste schon mal nach dem starten probiert auf die Box mit FTP zuzugreifen und deine orginal AVIA Files ins Ucode Verzeichnis zu kopieren ? Ist zwar eigentlich nicht gut die Files des Image zu überschreiben aber ein Versuch wäre es wert. Ansonsten lass die Box mal Hardware seitig checken.

sky

Anmelden

nach "BOOTING" schaltet sich meine DBOX aus. HILFE

Empfohlene Beiträge

Gast jonnywalker

Link zu diesem Kommentar

Auf anderen Seiten teilen

Fuemi

Link zu diesem Kommentar

Auf anderen Seiten teilen

Gast jonnywalker

Link zu diesem Kommentar

Auf anderen Seiten teilen

Gast IceBaer

Link zu diesem Kommentar

Auf anderen Seiten teilen

Gast sky

Link zu diesem Kommentar

Auf anderen Seiten teilen

Gast jonnywalker

Link zu diesem Kommentar

Auf anderen Seiten teilen

Gast jonnywalker

Link zu diesem Kommentar

Auf anderen Seiten teilen

Gast sky

Link zu diesem Kommentar

Auf anderen Seiten teilen

Gast jonnywalker

Link zu diesem Kommentar

Auf anderen Seiten teilen

Gast tachyon

Link zu diesem Kommentar

Auf anderen Seiten teilen

Gast sky

Link zu diesem Kommentar

Auf anderen Seiten teilen

Wer ist Online 0 Benutzer

Keywelt-Board

Aktivitäten