Hilfe beim Flashen

[Gast Fatti]

ich bekomme keinen Flash auf die Reihe kriege immer wieder dies meldung PPCboot gestoppt lade Flashimage

Was soll ich machen vor einer Weile hatte ich das Prob schon mal aber dann ging es auf einmal was kann das sein, wo liegt das Problem

Ich habe win mx drauf liegt es vielleicht daran?

 

bootdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.2 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a dsID 01-1b.40.81.07.00.00-5b

debug: HWrev 09 FPrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0044

 

will verify ELF image, start= 0x800000, size= 200660

verify sig: 262

Branching to 0x40000

 

 

PPCBoot 1.1.6 (TuxBox) (Nov 16 2002 - 10:23:37)

 

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache

Watchdog enabled

Board: DBOX2, Nokia

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: ........ done.

LCD: ready

FB: loading - ready

In: serial

Out: serial

Err: serial

 

Options:

1: framebuffer on ttyS0

2: framebuffer on fb0

3: framebuffer on null

Select option (1-3), other keys to stop autoboot: 0

...............................................................

Un-Protected 63 sectors

### FS (jffs2) loading 'vmlinuz' to 0x100000

### FS load compleate: 647481 bytes loaded to 0x100000

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 647417 Bytes = 632 kB = 0 MB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.19 (genial) #12 Sam Nov 16 19:45:12 CET 2002

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock/2 rw console=ttyS0

Decrementer Frequency = 251625000/60

mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)

Warning: real time clock seems stuck!

Console: colour dummy device 80x25

Calibrating delay loop... 66.76 BogoMIPS

Memory: 30820k available (1136k kernel code, 344k data, 68k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communications

AB.

i2c-core.o: i2c core module

CPM UART driver version 0.03

ttyS00 at 0x0280 is a SMC

ttyS01 at 0x0380 is a SMC

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:43:fc:07

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

Using word write method

Creating 5 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "ppcboot (flfs)"

0x00040000-0x00800000 : "root (jffs2)"

0x00020000-0x00800000 : "flash without bootloader"

0x00000000-0x00800000 : "complete flash"

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (jffs2 filesystem).

Mounted devfs on /dev

Freeing unused kernel memory: 68k init

init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modu

les/2.4.19/misc/i2c-8xx.o

[i2c-8xx]: mpc 8xx i2c init

i2c-core.o: adapter registered as adapter 0.

[i2c-8xx]: adapter: 0

Using /lib/modules/2.4.19/misc/info.o

i2c-core.o: driver FOR_PROBE_ONLY registered.

i2c-core.o: driver unregistered: FOR_PROBE_ONLY

i2c-core.o: driver FOR_PROBE_ONLY registered.

i2c-core.o: driver unregistered: FOR_PROBE_ONLY

Using /lib/modules/2.4.19/kernel/drivers/input/input.o

Using /lib/modules/2.4.19/kernel/drivers/input/evdev.o

Using /lib/modules/2.4.19/misc/event.o

event: init ...

Using /lib/modules/2.4.19/misc/saa7126.o

i2c-core.o: driver i2c saa7126 driver registered.

i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).

Using /lib/modules/2.4.19/misc/avs.o

i2c-core.o: driver i2c audio/video switch driver registered.

i2c-core.o: client [CXA2092] registered to adapter [](pos. 1).

Using /lib/modules/2.4.19/misc/fp.o

i2c-core.o: driver DBox2 Frontprocessor driver registered.

i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2

).

fp.o: clear_wakeup_timer [40][30]

Using /lib/modules/2.4.19/misc/dvb_demux.o

Using /lib/modules/2.4.19/misc/dvbdev.o

Using /lib/modules/2.4.19/misc/avia.o

Using /lib/modules/2.4.19/misc/dmxdev.o

Using /lib/modules/2.4.19/misc/cam.o

der moment ist gekommen...

AVIA: $Id: avia_core.c,v 1.32 2002/09/24 17:50:19 Jolt Exp $

Using /lib/modules/2.4.19/misc/dvb_frontend.o

i2c-core.o: driver DBox2-CAM registered.

CAM: attaching CAM at 0x6e

i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).

CAM: attached to adapter

Using /lib/modules/2.4.19/misc/lcd.o

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface on 1

write 1 event's ...

write 1 event's ...

initializing core...

adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

Intializing font cache...

Using /lib/modules/2.4.19/misc/avia_gt.o

avia_gt_core: $Id: avia_gt_core.c,v 1.23 2002/10/05 15:01:12 Jolt Exp $

avia_gt_core: autodetecting chip type... AViA GTX found

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.8 2002/10/13 21:16:15 Jolt Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.134 2002/09/21 00:00:08 Jolt Exp $

avia_gt_dmx: Successfully loaded ucode V0.14

avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.25 2002/10/11 09:57:54 Jolt Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19 2002/10/03 11:12:42 thegoodguy Exp $

avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17 2002/10/05 15:01:12 Jolt Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

Using /lib/modules/2.4.19/misc/dvb.o

Using /lib/modules/2.4.19/misc/ves1893.o

i2c-core.o: driver VES1893 DVB demodulator registered.

i2c-core.o: client [VES1893] registered to adapter [](pos. 4).

avia_gt_core: masking unhandled irq reg 0 bit 6

VES1893: attaching VES1893 at 0x10 to adapter

Using /lib/modules/2.4.19/misc/avia_gt_napi.o

avia_gt_napi: $Id: avia_gt_napi.c,v 1.130 2002/09/18 15:57:24 Jolt Exp $

avia_gt_napi: hardware section filtering enabled.

Using /lib/modules/2.4.19/misc/avia_gt_vbi.o

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $

avia_gt_vbi: got demux C-Cube - AViA eNX/GTX

Using /lib/modules/2.4.19/misc/avia_gt_fb.o

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

Using /lib/modules/2.4.19/misc/avia_gt_proc.o

avia_gt_proc: $Id: avia_gt_proc.c,v 0.7 2002/10/12 13:38:30 NoClue $

CXA2092 found

CXA2092 found

[CBasicClient] connect failed.

/tmp/sectionsd.sock: No such file or directory

$Id: sectionsd.cpp,v 1.139 2002/10/15 20:39:47 woglinde Exp $

caching 72 hours

events are old 60min after their end time

[camd] 1.CMD-Class 0xE0

[camd] no card is in slot #2

[camd] no card is in slot #1

[camd] ca system id: 1702

$Id: zapit.cpp,v 1.268 2002/10/28 22:47:21 thegoodguy Exp $

 

[zapit] Using /var/keys/camd for Emu mode.

[getservices.cpp] going to parse satellite Astra 19.2E

[getservices.cpp] going to parse satellite Eutelsat 13.0E

[zapit] LoadServices: success

[zapit] reading Bouquets ..................................

[zapit] Found 34 bouquets.

[zapit] channels have been loaded succesfully

[nhttpd] Neutrino HTTP-Server starting..

[camd] no card is in slot #2

[camd] no card is in slot #1

Killed

Network LCD-Driver $Id: lcdd.cpp,v 1.57 2002/10/17 10:16:35 thegoodguy Exp $

 

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[lcdd] load config

initializing core...

adding font /share/fonts/micron.ttf...OK (Micron/Regular)

Intializing font cache...

FTC_Face_Requester (Micron/Regular)

Controld $Id: controld.cpp,v 1.78 2002/11/05 19:47:21 obi Exp $

 

[controld] Boxtype detected: (01, 1, 1, Nokia)

set event: 00000009

[controld] Unknown aspectRatio: 0[controld] setting VideoFormat to auto

[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.344 2002/10/16 16:25:24 gbox-Version

Exp $

 

[neutrino] New Options : neutrino [-key] (Keyeditor) [-gbox] (gboxMenu) [-cug] (

Keyeditor+gboxMenu)

[neutrino] frameBuffer Instance created

[neutrino] vcrControl Instance created

1024k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] enable flash

[neutrino] Software update enabled

[neutrino] gbox Menu / gbox Info / Keyedit Feature enabled !

IP : 192.168.18.111

Netmask : 255.255.255.0

Broadcast: 192.168.18.111

Gateway : 192.168.18.120

CVCRControl registered new serverdevice: 0 ngrab

[neutrino] menue setup

[CHTTPUpdater] HTTP-Basepath:

[CHTTPUpdater] Image-Filename: cdk.cramfs

[CHTTPUpdater] Version-Filename: cdk.cramfs.version

loading locales: scandir: No such file or directory

[controld] setting VideoFormat to auto

video notify: videomenu.videoformat

[neutrino] control event register

[neutrino] sectionsd event register

[neutrino] zapit event register

[neutrino] timerd event register

[CPlugins] Dir: /lib/tuxbox/plugins/

[CFrontend::setFrontend] freq 1197500

[CPlugins] 3 plugins found...

[CFrontend::getEvent] FE_FAILURE_EV

zap failed!

initial zap failed - rezap

[CFrontend::setFrontend] freq 1197500

[CFrontend::getEvent] FE_FAILURE_EV

zap failed!

[Fuemi]

Auch bei dir mal wieder ein Netzwerkproblem:

- boot net failed

- Err: serial

 

Überprüf mal deine Netzwerkeinstellungen. Wie im Script zu lesen, steht bei dir:

IP : 192.168.18.111

Netmask : 255.255.255.0

Broadcast: 192.168.18.111

Gateway : 192.168.18.120

 

Mach mal Router, Firewall usw. alles aus. Dann PC auf 192.168.0.1 stellen ohne Gateway, und im BootManager für DBox die 192.168.0.2 einstellen.

Dann sollte es auch gehen.

[Gast KLaubach]

evtl. mal mit dem "boot net" Befehl arbeiten...

 

mfg

KLaubach(ja genau der....)