Gast Fatti Geschrieben 25. April 2003 Melden Share Geschrieben 25. April 2003 ich bekomme keinen Flash auf die Reihe kriege immer wieder dies meldung PPCboot gestoppt lade Flashimage Was soll ich machen vor einer Weile hatte ich das Prob schon mal aber dann ging es auf einmal was kann das sein, wo liegt das Problem Ich habe win mx drauf liegt es vielleicht daran? bootdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 01-1b.40.81.07.00.00-5b debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0044 will verify ELF image, start= 0x800000, size= 200660 verify sig: 262 Branching to 0x40000 PPCBoot 1.1.6 (TuxBox) (Nov 16 2002 - 10:23:37) CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache Watchdog enabled Board: DBOX2, Nokia I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ........ done. LCD: ready FB: loading - ready In: serial Out: serial Err: serial Options: 1: framebuffer on ttyS0 2: framebuffer on fb0 3: framebuffer on null Select option (1-3), other keys to stop autoboot: 0 ............................................................... Un-Protected 63 sectors ### FS (jffs2) loading 'vmlinuz' to 0x100000 ### FS load compleate: 647481 bytes loaded to 0x100000 ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 647417 Bytes = 632 kB = 0 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.19 (genial) #12 Sam Nov 16 19:45:12 CET 2002 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock/2 rw console=ttyS0 Decrementer Frequency = 251625000/60 mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000) Warning: real time clock seems stuck! Console: colour dummy device 80x25 Calibrating delay loop... 66.76 BogoMIPS Memory: 30820k available (1136k kernel code, 344k data, 68k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module CPM UART driver version 0.03 ttyS00 at 0x0280 is a SMC ttyS01 at 0x0380 is a SMC pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:43:fc:07 D-Box 2 flash driver (size->0x800000 mem->0x10000000) Using word write method Creating 5 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "ppcboot (flfs)" 0x00040000-0x00800000 : "root (jffs2)" 0x00020000-0x00800000 : "flash without bootloader" 0x00000000-0x00800000 : "complete flash" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (jffs2 filesystem). Mounted devfs on /dev Freeing unused kernel memory: 68k init init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modu les/2.4.19/misc/i2c-8xx.o [i2c-8xx]: mpc 8xx i2c init i2c-core.o: adapter registered as adapter 0. [i2c-8xx]: adapter: 0 Using /lib/modules/2.4.19/misc/info.o i2c-core.o: driver FOR_PROBE_ONLY registered. i2c-core.o: driver unregistered: FOR_PROBE_ONLY i2c-core.o: driver FOR_PROBE_ONLY registered. i2c-core.o: driver unregistered: FOR_PROBE_ONLY Using /lib/modules/2.4.19/kernel/drivers/input/input.o Using /lib/modules/2.4.19/kernel/drivers/input/evdev.o Using /lib/modules/2.4.19/misc/event.o event: init ... Using /lib/modules/2.4.19/misc/saa7126.o i2c-core.o: driver i2c saa7126 driver registered. i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0). Using /lib/modules/2.4.19/misc/avs.o i2c-core.o: driver i2c audio/video switch driver registered. i2c-core.o: client [CXA2092] registered to adapter [](pos. 1). Using /lib/modules/2.4.19/misc/fp.o i2c-core.o: driver DBox2 Frontprocessor driver registered. i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2 ). fp.o: clear_wakeup_timer [40][30] Using /lib/modules/2.4.19/misc/dvb_demux.o Using /lib/modules/2.4.19/misc/dvbdev.o Using /lib/modules/2.4.19/misc/avia.o Using /lib/modules/2.4.19/misc/dmxdev.o Using /lib/modules/2.4.19/misc/cam.o der moment ist gekommen... AVIA: $Id: avia_core.c,v 1.32 2002/09/24 17:50:19 Jolt Exp $ Using /lib/modules/2.4.19/misc/dvb_frontend.o i2c-core.o: driver DBox2-CAM registered. CAM: attaching CAM at 0x6e i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3). CAM: attached to adapter Using /lib/modules/2.4.19/misc/lcd.o lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface on 1 write 1 event's ... write 1 event's ... initializing core... adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) Intializing font cache... Using /lib/modules/2.4.19/misc/avia_gt.o avia_gt_core: $Id: avia_gt_core.c,v 1.23 2002/10/05 15:01:12 Jolt Exp $ avia_gt_core: autodetecting chip type... AViA GTX found avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.8 2002/10/13 21:16:15 Jolt Exp $ avia_gt_core: masking unhandled irq reg 1 bit 11 avia_gt_core: masking unhandled irq reg 1 bit 13 avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.134 2002/09/21 00:00:08 Jolt Exp $ avia_gt_dmx: Successfully loaded ucode V0.14 avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.25 2002/10/11 09:57:54 Jolt Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19 2002/10/03 11:12:42 thegoodguy Exp $ avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17 2002/10/05 15:01:12 Jolt Exp $ avia_gt_core: Loaded AViA eNX/GTX driver Using /lib/modules/2.4.19/misc/dvb.o Using /lib/modules/2.4.19/misc/ves1893.o i2c-core.o: driver VES1893 DVB demodulator registered. i2c-core.o: client [VES1893] registered to adapter [](pos. 4). avia_gt_core: masking unhandled irq reg 0 bit 6 VES1893: attaching VES1893 at 0x10 to adapter Using /lib/modules/2.4.19/misc/avia_gt_napi.o avia_gt_napi: $Id: avia_gt_napi.c,v 1.130 2002/09/18 15:57:24 Jolt Exp $ avia_gt_napi: hardware section filtering enabled. Using /lib/modules/2.4.19/misc/avia_gt_vbi.o avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $ avia_gt_vbi: got demux C-Cube - AViA eNX/GTX Using /lib/modules/2.4.19/misc/avia_gt_fb.o avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device Using /lib/modules/2.4.19/misc/avia_gt_proc.o avia_gt_proc: $Id: avia_gt_proc.c,v 0.7 2002/10/12 13:38:30 NoClue $ CXA2092 found CXA2092 found [CBasicClient] connect failed. /tmp/sectionsd.sock: No such file or directory $Id: sectionsd.cpp,v 1.139 2002/10/15 20:39:47 woglinde Exp $ caching 72 hours events are old 60min after their end time [camd] 1.CMD-Class 0xE0 [camd] no card is in slot #2 [camd] no card is in slot #1 [camd] ca system id: 1702 $Id: zapit.cpp,v 1.268 2002/10/28 22:47:21 thegoodguy Exp $ [zapit] Using /var/keys/camd for Emu mode. [getservices.cpp] going to parse satellite Astra 19.2E [getservices.cpp] going to parse satellite Eutelsat 13.0E [zapit] LoadServices: success [zapit] reading Bouquets .................................. [zapit] Found 34 bouquets. [zapit] channels have been loaded succesfully [nhttpd] Neutrino HTTP-Server starting.. [camd] no card is in slot #2 [camd] no card is in slot #1 Killed Network LCD-Driver $Id: lcdd.cpp,v 1.57 2002/10/17 10:16:35 thegoodguy Exp $ [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [lcdd] load config initializing core... adding font /share/fonts/micron.ttf...OK (Micron/Regular) Intializing font cache... FTC_Face_Requester (Micron/Regular) Controld $Id: controld.cpp,v 1.78 2002/11/05 19:47:21 obi Exp $ [controld] Boxtype detected: (01, 1, 1, Nokia) set event: 00000009 [controld] Unknown aspectRatio: 0[controld] setting VideoFormat to auto [neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.344 2002/10/16 16:25:24 gbox-Version Exp $ [neutrino] New Options : neutrino [-key] (Keyeditor) [-gbox] (gboxMenu) [-cug] ( Keyeditor+gboxMenu) [neutrino] frameBuffer Instance created [neutrino] vcrControl Instance created 1024k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] enable flash [neutrino] Software update enabled [neutrino] gbox Menu / gbox Info / Keyedit Feature enabled ! IP : 192.168.18.111 Netmask : 255.255.255.0 Broadcast: 192.168.18.111 Gateway : 192.168.18.120 CVCRControl registered new serverdevice: 0 ngrab [neutrino] menue setup [CHTTPUpdater] HTTP-Basepath: [CHTTPUpdater] Image-Filename: cdk.cramfs [CHTTPUpdater] Version-Filename: cdk.cramfs.version loading locales: scandir: No such file or directory [controld] setting VideoFormat to auto video notify: videomenu.videoformat [neutrino] control event register [neutrino] sectionsd event register [neutrino] zapit event register [neutrino] timerd event register [CPlugins] Dir: /lib/tuxbox/plugins/ [CFrontend::setFrontend] freq 1197500 [CPlugins] 3 plugins found... [CFrontend::getEvent] FE_FAILURE_EV zap failed! initial zap failed - rezap [CFrontend::setFrontend] freq 1197500 [CFrontend::getEvent] FE_FAILURE_EV zap failed! Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Fuemi Geschrieben 25. April 2003 Melden Share Geschrieben 25. April 2003 Auch bei dir mal wieder ein Netzwerkproblem: - boot net failed - Err: serial Überprüf mal deine Netzwerkeinstellungen. Wie im Script zu lesen, steht bei dir: IP : 192.168.18.111 Netmask : 255.255.255.0 Broadcast: 192.168.18.111 Gateway : 192.168.18.120 Mach mal Router, Firewall usw. alles aus. Dann PC auf 192.168.0.1 stellen ohne Gateway, und im BootManager für DBox die 192.168.0.2 einstellen. Dann sollte es auch gehen. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast KLaubach Geschrieben 26. April 2003 Melden Share Geschrieben 26. April 2003 evtl. mal mit dem "boot net" Befehl arbeiten... mfg KLaubach(ja genau der....) Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge