Gast Fatti Geschrieben 7. April 2003 Melden Share Geschrieben 7. April 2003 hallo ich habe eine nokia die bisher wunderbar lief wollte aber enigma ausprobieren jetzt läuft gar nichts mehr die kiste fängt normal an bis ich die ip eingeben soll wenn ich das erledigt steht das im bootmanager avia_gt_core: autodetecting chip type... AViA GTX found write 1 event's ... write 1 event's ... avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.8 2002/10/13 21:16:15 Jolt Exp $ avia_gt_core: masking unhandled irq reg 1 bit 11 avia_gt_core: masking unhandled irq reg 1 bit 13 avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1 2002/11/17 01:59:13 obi Exp $ avia_gt_dmx: Successfully loaded ucode V0.14 avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.25 2002/10/11 09:57:54 Jolt Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19 2002/10/03 11:12:42 thegoodguy Exp $ avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17 2002/10/05 15:01:12 Jolt Exp $ avia_gt_core: Loaded AViA eNX/GTX driver Using /lib/modules/2.4.20/misc/avia_gt_oss.o avia_oss: $Id: avia_gt_oss.c,v 1.12 2002/10/03 13:32:36 alexw Exp $ Using /lib/modules/2.4.20/misc/avia_gt_dvr.o avia_gt_dvr: $Id: avia_gt_dvr.c,v 1.9 2002/10/03 12:47:57 Jolt Exp $ Using /lib/modules/2.4.20/misc/avia_gt_fb.o avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.2.1 2003/02/20 10:11:49 thegoodguy Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device Using /lib/modules/2.4.20/misc/avia_gt_proc.o avia_gt_proc: $Id: avia_gt_proc.c,v 0.86 2003/01/15 13:43:00 TBFT Exp $ options: (demux reinit) enx_reset=1 (framer chan.) fc_reset=0 avia_gt_proc: AVIA GTX - found Using /lib/modules/2.4.20/misc/cam.o der moment ist gekommen... i2c-core.o: driver DBox2-CAM registered. CAM: attaching CAM at 0x6e i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3). CAM: attached to adapter Using /lib/modules/2.4.20/misc/dvb.o dvb.c: init_dvb Using /lib/modules/2.4.20/misc/ves1893.o i2c-core.o: driver VES1893 DVB demodulator registered. i2c-core.o: client [VES1893] registered to adapter [](pos. 4). avia_gt_core: masking unhandled irq reg 0 bit 6 VES1893: attaching VES1893 at 0x10 to adapter Using /lib/modules/2.4.20/misc/avia_gt_napi.o avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1 2002/11/17 01:59:13 obi Exp $ avia_gt_napi: hardware section filtering disabled. Using /lib/modules/2.4.20/misc/dvb_net.o dvb_net: $Id: dvb_net.c,v 1.6 2002/08/12 18:24:05 obi Exp $ Using /lib/modules/2.4.20/misc/lcd.o lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface on 1 ^H^H^H^H^H help Please press Enter to activate this console. BusyBox v0.60.4 (2003.03.11-11:29+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. sh: can't access tty; job control turned off ~ # debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 01-1b.40.81.07.00.00-5b debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0044 will verify ELF image, start= 0x800000, size= 200660 verify sig: 262 Branching to 0x40000 PPCBoot 1.1.6 (TuxBox) (Nov 16 2002 - 10:23:37) CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache Watchdog enabled Board: DBOX2, Nokia I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ....... done. LCD: ready FB: loading - ready In: serial Out: serial Err: serial Options: 1: framebuffer on ttyS0 2: framebuffer on fb0 3: framebuffer on null Select option (1-3), other keys to stop autoboot: 0 ............................................................... Un-Protected 63 sectors ### FS (jffs2) loading 'vmlinuz' to 0x100000 ### FS load compleate: 724557 bytes loaded to 0x100000 ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 724493 Bytes = 707 kB = 0 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.20 (lucgas@linux) (gcc version 3.2.1) #1 Sam Feb 22 03:02:09 C ET 2003 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock/2 rw console=ttyS0 Decrementer Frequency = 251625000/60 mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000) Warning: real time clock seems stuck! Console: colour dummy device 80x25 Calibrating delay loop... 66.76 BogoMIPS Memory: 30632k available (1256k kernel code, 404k data, 76k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module CPM UART driver version 0.03 ttyS00 at 0x0280 is a SMC ttyS01 at 0x0380 is a SMC pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:43:fc:07 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize D-Box 2 flash driver (size->0x800000 mem->0x10000000) Using word write method Creating 5 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "flfs (ppcboot)" 0x00040000-0x00800000 : "root (jff2)" 0x00020000-0x00800000 : "flash without bootloader" 0x00000000-0x00800000 : "complete flash" mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> cramfs: wrong magic VFS: Mounted root (jffs2 filesystem). Mounted devfs on /dev Freeing unused kernel memory: 76k init init started: BusyBox v0.60.4 (2003.03.11-11:29+0000) multi-callUsing /lib/modu les/2.4.20/misc/i2c-8xx.o [i2c-8xx]: mpc 8xx i2c init i2c-core.o: adapter registered as adapter 0. [i2c-8xx]: adapter: 0 Using /lib/modules/2.4.20/misc/info.o i2c-core.o: driver FOR_PROBE_ONLY registered. i2c-core.o: driver unregistered: FOR_PROBE_ONLY i2c-core.o: driver FOR_PROBE_ONLY registered. i2c-core.o: driver unregistered: FOR_PROBE_ONLY mID: 01 feID: dd fpID: 5a enxID: ffffffff gtxID: 0b hwREV: 05 fpREV: 81 DEMOD: VES1893 Using /lib/modules/2.4.20/misc/event.o event: init ... Using /lib/modules/2.4.20/misc/saa7126.o i2c-core.o: driver i2c saa7126 driver registered. i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0). Using /lib/modules/2.4.20/misc/avs.o i2c-core.o: driver i2c audio/video switch driver registered. i2c-core.o: client [CXA2092] registered to adapter [](pos. 1). Using /lib/modules/2.4.20/misc/dvb_frontend.o Using /lib/modules/2.4.20/misc/dvb_filter.o Using /lib/modules/2.4.20/misc/dmxdev.o Using /lib/modules/2.4.20/misc/dvb_demux.o Using /lib/modules/2.4.20/misc/fp.o i2c-core.o: driver DBox2 Frontprocessor driver registered. i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2 ). Using /lib/modules/2.4.20/misc/avia_av.o avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $ Using /lib/modules/2.4.20/misc/dvbdev.o avia_av_event: $Id: avia_av_event.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $ Using /lib/modules/2.4.20/misc/avia_gt.o avia_gt_core: $Id: avia_gt_core.c,v 1.23 2002/10/05 15:01:12 Jolt Exp $ avia_gt_core: autodetecting chip type... AViA GTX found avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $ write 1 event's ... write 1 event's ... avia_gt_accel: $Id: avia_gt_accel.c,v 1.8 2002/10/13 21:16:15 Jolt Exp $ avia_gt_core: masking unhandled irq reg 1 bit 11 avia_gt_core: masking unhandled irq reg 1 bit 13 avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1 2002/11/17 01:59:13 obi Exp $ avia_gt_dmx: Successfully loaded ucode V0.14 avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.25 2002/10/11 09:57:54 Jolt Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19 2002/10/03 11:12:42 thegoodguy Exp $ avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17 2002/10/05 15:01:12 Jolt Exp $ avia_gt_core: Loaded AViA eNX/GTX driver Using /lib/modules/2.4.20/misc/avia_gt_oss.o avia_oss: $Id: avia_gt_oss.c,v 1.12 2002/10/03 13:32:36 alexw Exp $ Using /lib/modules/2.4.20/misc/avia_gt_dvr.o avia_gt_dvr: $Id: avia_gt_dvr.c,v 1.9 2002/10/03 12:47:57 Jolt Exp $ Using /lib/modules/2.4.20/misc/avia_gt_fb.o avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.2.1 2003/02/20 10:11:49 thegoodguy Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device Using /lib/modules/2.4.20/misc/avia_gt_proc.o avia_gt_proc: $Id: avia_gt_proc.c,v 0.86 2003/01/15 13:43:00 TBFT Exp $ options: (demux reinit) enx_reset=1 (framer chan.) fc_reset=0 avia_gt_proc: AVIA GTX - found Using /lib/modules/2.4.20/misc/cam.o der moment ist gekommen... i2c-core.o: driver DBox2-CAM registered. CAM: attaching CAM at 0x6e i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3). CAM: attached to adapter Using /lib/modules/2.4.20/misc/dvb.o dvb.c: init_dvb Using /lib/modules/2.4.20/misc/ves1893.o i2c-core.o: driver VES1893 DVB demodulator registered. i2c-core.o: client [VES1893] registered to adapter [](pos. 4). avia_gt_core: masking unhandled irq reg 0 bit 6 VES1893: attaching VES1893 at 0x10 to adapter Using /lib/modules/2.4.20/misc/avia_gt_napi.o avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1 2002/11/17 01:59:13 obi Exp $ avia_gt_napi: hardware section filtering disabled. Using /lib/modules/2.4.20/misc/dvb_net.o dvb_net: $Id: dvb_net.c,v 1.6 2002/08/12 18:24:05 obi Exp $ Using /lib/modules/2.4.20/misc/lcd.o lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface on 1 Please press Enter to activate this console. BusyBox v0.60.4 (2003.03.11-11:29+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. sh: can't access tty; job control turned off ~ # was ist hier los und vorallen wie kann ich sache in ordnung bringen? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Fuemi Geschrieben 8. April 2003 Melden Share Geschrieben 8. April 2003 Mit BootManager, Cross- und Nullmodemkabel? Meldung: boot net failed und Err: serial = Netzwerkprobleme Überprüf mal dein Netzwerk und die Einstellungen im BootManager Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge