fw1703 Geschrieben 7. Juni 2007 Melden Share Geschrieben 7. Juni 2007 debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS debug: BMon V1.2 mID 03 debug: feID 00 enxID 03 debug: fpID 52 dsID 01-78.c9.b9.07.00.00-ad debug: HWrev 21 FPrev 0.23 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS debug: Got Block #0040 will verify ELF image, start= 0x800000, size= 154948 verify sig: 262 Branching to 0x40000 U-Boot 1.1.4 (Tuxbox) (Apr 10 2006 - 22:44:42) CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Sagem, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: .... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 696900 bytes loaded to 0x100000 ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 696836 Bytes = 680.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.32-dbox2 (image@tower) (gcc version 3.4.4) #1 Do Aug 31 20:09: 34 CEST 2006 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs Decrementer Frequency = 247500000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 65.74 BogoMIPS Memory: 30776k available (1184k kernel code, 348k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. Squashfs 2.2-r2 (released 2005/09/08) © 2002-2005 Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:32:4e:1b loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00540000 : "root (squashfs)" 0x00540000-0x007e0000 : "var (jffs2)" 0x007e0000-0x00800000 : "FLFS (U-Boot)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.1.3 (2006.08.31-18:14+0000) multi-call mount: Mounting /dev/mtdblock/2 on /var failed: No such file or directory event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ Detected STB: Vendor: Sagem Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $ avia_av_core: Starting avia_av_wdt thread. avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... eNX avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_av_core: Starting avia_gt_wdt thread. avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ DVB: registering frontend 0:0 (VES1993)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2005/12/11 22:30:00 Skars & Merandos Exp $ avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension options: (demux reinit) enx_reset=1 (framer chan.) fc_reset=1 (clr avia reg) avia=0 (enx td trace) trace=1 (lock, unlock) spinlock=0 Schreiben ueber /proc/bus/gtx (delay) delay=500 Starting the automounter Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970 $Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $ [sectionsd] Caching max 6000 events [sectionsd] Caching 14 days [sectionsd] Events are old 60min after their end time /var/plugins/operations logcs_init /var/plugins/operations camd_init $Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 Kroki & Worschter Exp $ [zapit] MAX_SOCKETS=3 [zapit] PMT update enabled /var/plugins/operations cardserver_start /var/plugins/operations camd_start insmod: Warning: kernel-module version mismatch /var/modules/multicam.o was compiled for kernel version 2.4.25-dbox2 while this kernel is version 2.4.32-dbox2 DBox2 Multicam Driver v1.01 skars & doz21 starte camd3 /var/plugins/operations check_camd3_socket 01.01.1970 01:00:10 camd3: BOXTYPE: 1 01.01.1970 01:00:10 camd3: LOG: 6 01.01.1970 01:00:10 camd3: UDP_PORT: 20248 01.01.1970 01:00:10 camd3: original slot au on 01.01.1970 01:00:10 camd3: HTTP_PORT: 9080 01.01.1970 01:00:10 camd3: LOG_HOST: 127.0.0.1:514 01.01.1970 01:00:10 camd3: DNS_CACHE: 600 sec 01.01.1970 01:00:10 camd3: SOCKET: /tmp/camd.sock01 01.01.1970 01:00:10 camd3: KEYS: /var/keys/camd3.keys 01.01.1970 01:00:10 camd3: SERVERS: /var/keys/camd3.servers 01.01.1970 01:00:10 camd3: USERS: /var/keys/camd3.users 01.01.1970 01:00:10 camd3: Slot /dev/tts/1: (carddetect=password1) initialisiere ... 01.01.1970 01:00:12 camd3: Slot /dev/tts/1: starte Monitor... 01.01.1970 01:00:12 camd3: Slot /dev/tts/1: bereit 01.01.1970 01:00:12 camd3: original slot: CAID=1702 01.01.1970 01:00:12 camd3: KeyDB: gestartet 01.01.1970 01:00:13 camd3: HTTP: started on port 9080 01.01.1970 01:00:13 camd3: camd v3.868 - erfolgreich gestartet [getservices] /var/tuxbox/config/zapit/myservices.xml found. [getservices] dup transponder id 3 onid 85 [getservices] dup transponder id 11 onid 85 [getservices] dup transponder id 2 onid 85 [getservices] dup transponder id 4 onid 85 [getservices] dup transponder id 1 onid 85 /tmp/currentservices.xml: No such file or directory $Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $ [controld] Boxtype detected: (3, Sagem D-BOX2) [controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1 [yhttpd] Webserver nhttpd/3.1.2 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [sectionsd] getUTC: read: Connection timed out [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [yhttpd] Webserver starting... /var/plugins/operations epg_reinit neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix15/Bold) [LCDFONT] FTC_Face_Requester (Fix14/Bold) /dev/input/event1: No such file or directory [neutrino] menue setup [neutrino] received 43 sats [neutrino] registering as event client [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [neutrino] initialized everything zap failed! [LCDFONT] FTC_Face_Requester (Fix12/Regular) [sectionsd] getUTC: read: Connection timed out zap failed! Lässt sich daraus was schließen? Der erste Zap failed bei einem D+ Kanal und der 2te bei Sat1 Felix Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
fw1703 Geschrieben 8. Juni 2007 Autor Melden Share Geschrieben 8. Juni 2007 help me Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
merkwuerden Geschrieben 8. Juni 2007 Melden Share Geschrieben 8. Juni 2007 Schon mal eine andere Box an dem Anschluß getestet? Geht mit der Sagem überhaupt ein Sender zu empfangen? Wenn ja, welcher und mit welchen BER/SNR/SIG Werten? Und auch wenn nichts zu empfangen geht: BER/SNR/SIG posten, mitsamt dem Sender, der eigentlich dazu gehören sollte. Sorry, aber bei Deinen geizigen Informationen brauchst Du Dich über fehlende Hilfe nicht wundern, die ist da nämlich einfach unmöglich. Ein eventueller Tunerdefekt oder Defekt an der Empfangsanlage läßt sich anhand eines Bootlogs nicht erkennen. Und meine Kristallkugel ist kaputt... Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
fw1703 Geschrieben 8. Juni 2007 Autor Melden Share Geschrieben 8. Juni 2007 also der anschluss ist gut! der ber ist unheimlich hoch, der ganz untere balken ist bei 34000. der in der mitte auf 0 ...naja ebay Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.